.

 

HVAC Filters - Panel Filters

Panel filters are used in industries to retain particles ranging from 1 micron to 50 micron. These filters are basically air intake filters, which is working with negative pressure of systems.

Type: Flange or Box

Construction: M.S.duly painted, Aluminium, G.I. or S.S.

Media:

  • The media is sandwiched between layers of HDPE mesh which act as a retainer and screens out large particles and prevents them from being embedded in the media. The media is pleated and held rigidly in place by a rod frame
  • Crimps are separated by aluminium or S.S. spacers for uniform distribution of flow

Technical Specifications

Standard Filtration Ratings: 20 microns, 15 microns, 10 microns, 5 microns, 3 microns

Filtration Rating I.P.D. F.P.D. Testing
Up to 95% down to 5 µm 7 mm WC at rated flow 20 mm WC As per BS EN 779
Up to 90% down to 20 µm 5 mm WC at rated flow 17 mm WC As per BS EN 779
Up to 90% down to 10 µm 5 mm WC at rated flow 17 mm WC As per BS EN 779
Up to 95% down to 3 µm 8 mm WC at rated flow 20 mm WC As per BS EN 779

Gasket

Rubber Gasket

Salient Features of Panel Filter

  • Low pressure drop due to pleated configuration 
  •  Easy to install
  •  No bypassing 
  •  Washable & reusable ake 
  •  High dirt holding capacity
  •  Good mechanical strength
  •  Retrofit to any standard make 

Application of Panel Filters

  • Fine filtration in pharmaceuticals,
  • Food processing
  • Fertilizer industry
  • Petrochemicals
  • Computer rooms
  • Hotels
  • Corporate Offices
 

WE CAN ALSO PROVIDDE SIZES CUSTOMER REQUIREMENTS .