Filter Housings

Compressed Air Filters protect your equipment and delicate instruments from the dirt, water, and oil usually found in compressed air filters remove these contaminants at an efficiency rate of 99.99% for 0.01 micron particles and droplets





Air/oil separators are also called oil separators. The oil separator is the component that separates the compressor Lubricant from the compressed air and returns it to the main oil sump.




Coalescing Filters

Coalescing Filters are used in applications where sub-micron and aerosol mists must be removed from a gas stream. Reduce Maintenance and Operating Costs Associated with Contaminated Gas.




Disc Filters

Filter discs are mainly used in the absorption, evaporation and filtration process in petroleum, chemical, medicine, metallurgy, machinery, ship and automobiles to delete the mist drop or liquid foam or used as air filter in cars and trucks.




Dust Collecting Cartridges

Our wide range of filter media includes several types of Spun bond polyester, cellulose, needle felts etc. These can be equipped with antistatic, oil and water repellent properties with special coatings or membranes.




PP Filter Bags

High-intensity rare-earth magnetic rods are highly effective at removing ferrous contaminants from free-flowing products, sugar, grain, tea, plastic granules, chemical powders or liquids.




SS Filter Bags

Rectangular SS filter bags can be manufactured as per the required pipe size. These bags are spot welded at the edges so as to provide leak proof solutions. The mouth of the Bag can be designed as per the pipe size.




Y Type

“Y” Strainers take their name from their configuration. They are most commonly used in pressurized lines, gas or liquid, but can also be used in suction or vacuum conditions. The compact and lightweight design, and the quick and easy cleaning ability, the Y-filter found in many areas of their deployment.

They are intended for applications where small amounts of solid particulate are expected, and where clean-out will be infrequent.




T Type

Tee-type strainers are designed to remove particles from pipelines where a compact accessible strainer is needed for protection of fluid handling systems. Further the use of custom assembled micron meshes and screens also ensures in them optimum functionality standards.




Simplex Housings

Basket strainer elements can be offered in single cylinder, multi cylinder & pleated design depending upon requirement .They are constructed of filter housing, filter element supported with perforated cage, positive sealing arrangement to avoid any bypass & choice of end connections.




Duplex Housings

Duplex basket filter & strainer permits continuous operation because flow can be switched back and forth between two filter sections. This allows one side to be serviced while the other is in use. Normally duplex basket filters are separated with three way ball valves or two way ball valve/ butterfly valve connected with equalization tee, between two baskets filter housing.




Panel Filters

Panel filters are used in industries to retain particles ranging from 1 micron to 50 micron. These filters are basically air intake filters, which is working with negative pressure of systems.




Pocket Filters

The fibers are not affected by moisture and therefore, synthetic pocket is a perfect choice for high humidity or intermittent moisture conditions. Unlike fiberglass, synthetic materials are easy to handle and will not cause skin irritation.




HEPA Filters

These are absolute type filters having efficiency of 99.97 down to 0.3 Microns. The media is imported glassfiber sealed with polyurethane.




FCU Filters

These filters are used for coarse filtration and are predominantly used for HVAC ductable Systems. Media is black HDPE along with non woven.




Foam Filters

Filter foam, also known as reticulated foam, is a porous, low-density type of polyurethane foam with an open cell structure.Foam filter media is washable for repeated use. Widely used as a permanent washable filter in place of metal filters or disposable panel filters in HVAC equipment.




Disposable Filters

We manufacure and provide paper frame (Disposable type) filters. These are use and throw filters having high dust holding capacity and are easy to replace.




Kitchen hood filters

Kitchen hood filters are a special heavy duty filter with excellent fat and oil retention characteristics. The vapour condenses once they pass through these baffles.




Magnetic Strainers

High-intensity rare-earth magnetic rods are highly effective at removing ferrous contaminants from free-flowing products, sugar, grain, tea, plastic granules, chemical powders or liquids.




Wire Mesh Filters

S.S. Wire-mesh cartridges are made from S.S. wire-mesh media by pleating it to give more surface area. Wire Mesh Filters are manufactured with layers of woven wire mesh as filter media. Perforated metal sheet are welded into tubes as inner and outer shell for support to add strength.




Fiber Glass Cartridges

We makes a wide range of fiberglass filter elements for natural gas / oil purification. They are designed to withstand vibration, pulsation, and abrasion from pipe scale and liquid slugging. The media is imported borosilicate micro fibre glass element. The core/centre tube is wrapped so as to avoid media migration.




Cellulose Paper filter cartridges

Aaba International offers pleated elements in a variety of sizes and end cap configurations. Medias included pleated phenolic resin impregnated paper for nominal filtration applications, pleated microglass for absolute rated applications, cleanable pleated stainless steel for high temperature or corrosive processes, and many others available for custom applications.




Sintered Bronze

Uniform pore distribution and controllable pore size. They have high separation reliability and high temperature and thermal shock resistance.




Ceramic Sintered

These are microporous ceramic filter cartridges with Alumina binders which impart excellent chemical compatibility with various acids and aggressive chemicals. These cartridges are regenerable by back washing followed by oven drying.




S. S. Sintered

Stainless steel is ideal for long-term use in particularly aggressive high temperature environments.Cleanable and regenerable using back flushing, ultrasonic and other commonly used procedures over many cycles ensuring long service life.




Polymer Sintered

Polymer Sintered cartridges have intricate network of open celled omnidirectional pores in average sizes from 0.8 -2000 microns. Due to sintering process the filtration follows tortuous path. Not only do they act as surface filters by trapping particles larger than their average pore size , they also trap much smaller particulate matter deep in their complex channels.




Basket Strainers

We have competency to design and manufacture custom filters to suit customer requirements.

M / T to suit fluid applicant, dimension to suit space containers, filter media to suit suspended solids element design to suit collapsible are all taken in to account and given equal importance.

Filter elements are supported with perforated cage, positive sealing arrangement to avoid any bypass.




Conical Strainers

Conical strainers that we offer are extensively used as sweepers for flushing pipeline debris prior to commissioning of plants & equipments. Their main function is to remove objects such as welding electrode butts, slag, pliers, spanners, nut-bolts etc. These strainers protect screen of Y and Basket strainers, cartridge of microfine filters and other expensive piping equipments.




Wound Cartridges

Wound cartridges are designed to meet the most demanding filtration duties. They offer an economic, compact, easily installed and maintained filtration system for removal of particulates from liquid. The typical honeycomb structure of the filter body gives it a considerable capacity for accumulating impurities present in the fluid being filtered. The larger foreign particles are filtered out on the surface , while smaller particles are blocked later in the inner filtering substance.




Spun Cartridges

Spun bonded filter cartridges are made up of 100% polypropylene fibers. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. Filter cartridges are available with core & without core version. The superior structure remains integral even under severe operating conditions and there is no media migration. Polypropylene fibers are blown continuously on central molded core, without any binders, resins or lubricants.




PP Housings

We offer high quality pp housings Polypropylene, as the raw material, non-poisonous tasteless, is melt-sprayed, extruded, stretched and formed into tube-link  core,  forming  a  true  gradient  density  from  outer  to  inner  surfaces,  which  has  the  character  of  pressure-proof,  corrosion-resistance, high precision and large flowrate.  

The larger body size allows for greater cartridge capacity, thus reducing the number of vessels normally required in parallel installation. The internal port has been enlarged from standard size to allow liquid to pass through with minimum restriction.




Pleated Cartridges

Aaba pleated series water filter cartridges outperform wound, spun, melt blown, resin bonded and other “depth” type filter elements because the cartridges are pleated to provide increased surface area and longer life.

Lower pressure drop is another significant advantage, using pleated cartridges, which allows for increased flow rates and the use of smaller filter housings to reduce capital equipment costs.